Most bathrooms require a geyser, or a water heater, to provide hot water for showering, bathing, and other household tasks. However, using a geyser can be challenging if you’re unfamiliar with the appliance.
This blog post will cover the fundamentals of how to use geyser in bathroom —from turning it on to adjusting the temperature and maintaining it.
How to use geyser in bathroom?
Using a geyser, you can have hot water for showers and baths in your bathroom. To use your geyser effectively and safely, you should follow these steps:
Turn on the geyser:
Depending on your geyser type, you may need to turn it on using a switch or a knob. Turn on the switch for electric geysers and wait for the water to warm up. When using a gas geyser, start the pilot flame and turn on the gas supply. To prevent any accidents, strictly adhere to the manufacturer’s instructions.
Adjust the temperature:
A thermostat is typically included with geysers so you can change the water’s temperature. Incorporating your preferences into the temperature setting, remember that higher temperatures can be risky and result in burns.
Wait for the water to heat up:
Wait for the water to warm up after turning on the geyser and adjusting the temperature. Depending on the size and capacity of your geyser, this might take some time. Wait until the hot water reaches the desired temperature before using it.
Use the hot water:
You can take a bath or shower using the water once it has warmed up. Open the faucet and allow the hot water to flow. To prevent scalding, start with a lower temperature and gradually raise it as necessary.
Turn off the geyser:
Be sure to turn off the geyser after using it to conserve energy and avoid mishaps. Turn off the switch for electric geysers and the gas supply for geysers that are gas.
To prevent accidents, be sure to heed the following safety advice:
- Keep the geyser away from anything that could catch fire and heat sources.
- When the geyser is running or right after use, avoid touching it because it could boil and result in burns.
- Covering the geyser or its pipes with clothing or other items can lead to overheating and fire risk.
- Maintain your geyser regularly by cleaning, descaling, and inspecting it for leaks or other problems.
You can use your bathroom geyser safely and effectively and take advantage of hot water for all your bathing needs by following these easy steps and safety advice.
Types of geysers in India:
It’s crucial to comprehend the various types of geysers on the market and how they operate before using your geyser in the bathroom. Electric and gas geysers are the two most prevalent types in India.
1. Electric geysers:
These heat water by electricity and have an insulated tank for storing the heated water. Electric geysers are a standard option for most households because they are typically simpler to install and maintain. To accommodate the requirements of various families, they are offered in multiple sizes and capacities.
2. Gas Geysers:
They heat water using LPG or natural gas. They can be used in places with frequent power outages because they don’t need electricity. Gas geysers are typically more energy-efficient and smaller in size than electric geysers. However, they necessitate a separate gas connection, which can be more expensive.
In addition to these two varieties, there are solar geysers that heat water using solar energy and instant geysers that heat water instantly without needing a storage tank.
No matter what kind of geyser you have, it’s critical to comprehend how it operates and adhere to the manufacturer’s recommendations for safe and effective use. Read the user manual included with your geyser and become familiar with its parts and operations.
Simple Maintenance Tips for Your Geyser:
A geyser’s lifespan can be increased, and its effectiveness can be guaranteed by regular maintenance.
Here are some easy maintenance recommendations you can use:
- Regular cleaning: To avoid dust and dirt buildup, clean the geyser’s exterior regularly. Gently wipe the surface with a wet cloth.
- Look for leaks: Check the geyser for any connections or pipe leaks. If a small leak is ignored, it could develop into a more significant issue.
- Check the pressure relief valve: The geyser’s pressure relief valve needs to be checked regularly to ensure it functions correctly. Lifting the valve’s lever and observing whether water emerges will allow you to do this. Immediately replace the valve if there is no water flow or broken.
- Drain the geyser: To eliminate any mineral or sediment buildup that might reduce its effectiveness, it is advised to drain the geyser once a year. To do this, close the water and power valves on the geyser and then attach a hose to the drain valve. Let the water flow out by opening the valve.
- Check the thermostat: The geyser’s thermostat must be regularly examined to ensure it is operating correctly. The thermostat should be changed immediately if there are any problems.
Your geyser will run effectively and last longer if you adhere to these basic maintenance suggestions.
Key Takeaways:
- Before installation, be familiar with the features and specifications of your geyser.
- Always ensure the geyser is set up correctly and by a licensed electrician or plumber.
- To ensure safety and effectiveness, operate your geyser according to the correct procedures.
- Regular upkeep, including cleaning, looking for leaks, and draining the geyser, can help to increase its lifespan and guarantee effective operation.
- The safety precautions and potential risks of using a geyser, such as overheating or electric shock, must be understood.
Conclusion:
Using a geyser in the bathroom requires understanding its type and operation and following safety guidelines. Following the manufacturer’s instructions, adjusting the temperature, and practising regular maintenance, you can safely and effectively enjoy hot water for your bathing needs. Remember to prioritise safety and be aware of the potential risks associated with geysers.
